What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
11.06.2025 04:20

What is lightning?
It seems Mohan does not understand the difference between a comment and an Answer.
There are two important concepts here.
Bitcoin Price Rises. This Could Be the Next Big Crypto IPO After Success of Circle Stock. - Barron's
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
An AC voltage/ current source, and an ac inductive load.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
What does a fuse do?
Heart Disease: What You Eat Matters More Than Cutting Carbs, Fat - Healthline
The third is lightning and “how it gets conducted into a home.”
At least they know the answer if they wanted it.
Edit 2024–10.
but this device (an Inductor) … impedes the rapid changes in the current.
First Sentence:
but I think this circuit , shows a few more pieces.
Apple details the end of Intel Mac support and a phaseout for Rosetta 2 - Ars Technica
The MOV will conduct when the voltage exceeds 50% of line voltage.
(Dc diagram shown, AC is similar).
It also is a device that limits the change in current flow.
What is the meanest thing your husband has said to you?
But… the neutral is now “floating” because of the 1 ohm resistance.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
This one hit behind the barn.
So, the voltage could go up to 500 volts, and the fuse will not open up.
Billie Eilish Kisses Nat Wolff in Italy amid Romance Rumors - AOL.com
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
2024–10–16 [ OO OLAOYE OYEBODE ]
Because the load is inductive, the current lags the voltage.(by a bit).
Packers waive receiver, open up roster spot - Acme Packing Company
There are three different concepts here that are getting confused.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
He then describes Rainy Season and Lightning.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Barnstars:
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
One
eight
2024–10–14 [Omar Gharbi Omar Gharbi ]
so, what happens?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
[old diagram got deleted by accident]
This is 'the assistant's answer'
One is “what exactly is in a ‘surge protector’ ? ”
I post the exact comment here.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
[image of Common-mode choke]
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
a photo is worth a thousand words.
the problem then depends on "how fast does the fuse operate?".
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
2024–10–10[John johnson John Johnson ]
He then describes the function of a fuse.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
At one ohm, the resistor has a maximum of 1 watt power.
Now when you have a certain ac resistance, then a current flows in a loop.
This is where the MOV conducts again, and dissipated the energy.
Upvotes:
A fuse is a non-resetable over current circuit protector.
This device then solves the entire problem.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
A circuit breaker is similar, but is resettable.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
But it can get overloaded, and no longer works.
For this case there are devices called Metal oxide varistors (MOV).
The other is “what does a “fuse” do?”
These are simplified answers to the original question, and does not change anything I wrote above.
He then asserts :
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
what exactly is a ‘surge’ protector?
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
These devices are installed between the “hot” and “neutral” and protective ground.
In schematic diagrams this is the symbol for a fuse:
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
The bolt then partially travels down the line to your home.
nine
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Here is a simplified AC power diagram.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.